|
|
|
|
Model MH & Model LM NFPA Pneumatic Cylinders |
|
|
"Selecting End Cap Cushion Adjustment Screw Locations" |
|
The purpose of this configurator screen is to identify the Front and Rear End Cap side locations for placement of our Cushion Adjustment Screw as it may be located on any one of the four sides of the square end cover that is not restricted by the cylinder mount. When selecting the Cushion Adjustment Screw location, one must always view the cylinder through the Front End Cap even when selecting the Cushion Adjustment Screw location for the Rear End Cap. The illustration below provides an explanation on how to view the cylinder for making the Cushion Adjustment Screw location(s) decision.
The Peninsular Model MH and Model LM pneumatic cylinders adjustable cushion system is designed with a captive cushion screw to assure user safety.
When selecting Cushion Adjustment Screw locations for Double Rod End Cylinders, please contact Peninsular.
|
|
| End Cap Cushion Adjustment Screw Location Chart | |
| End Cap Side Positions |
View of a Side Foot Lug Mounting Style cylinder (MS2) showing both the Front & Rear End Caps with an Air Supply Port at Position #1 and our captive Cushion Adjustment Screw at Position #4.
Arrows are pointing to the End Cap Side Locations |
|
For any cylinder mount, always view the Cylinder through the Front End Cap when determining the Cushion Adjustment Screw End Cap Side location for both the Front and Rear End Caps. |
|
 |
 |
|
We recommend that you also reference our “Helpful Hint” regarding "Cushions".
If you need any assistance please feel free to call us toll free at (800) 526-7968 in the USA or Canada or at (586) 775-7211. You may also e-mail us at sales@peninsularcylinders.com.
Toll Free: 800-526-7968 Phone: (586)
775-7211 Fax: (586) 775-4545 |
|